The Ultimate Guide to Fitting Garden Screens on Fence

Introduction

Garden screening has become increasingly popular in the UK over the years. Not only does it add to the aesthetic appeal of your garden, but it also offers privacy and protection. There are several types of garden screening available in the market, including wooden, metal, and mesh screens. One of the most durable and long-lasting options is aluminium metal garden screening.

In this article, we will guide you on how to fit a garden screen on a fence. Whether you are an experienced DIY-er or just starting out, we have got you covered. So, let's get started.

Materials Needed

Before we start the process of fitting a garden screen on a fence, it is essential to gather all the necessary materials. These include:

• Aluminium metal garden screening
• Screwdriver or drill
• Screws
• Wall plugs
• Measuring tape
• Pencil
• Safety glasses

Step 1: Measure the Fence

If you're installing a garden screen on your fence, it's important to start with the right measurements. Measure both the length and height of the fence to determine the size of the screen panel that you need to purchase. Take your time and make sure that your measurements are accurate so that the screen panel fits perfectly on the fence. Consider measuring the fence several times to be extra sure that your measurements are correct. Once you have the right measurements, you can use them to purchase the right size screen panel and move on to the next step of the installation process. By taking the time to measure the fence accurately, you can ensure that your garden screen looks great and serves its purpose for years to come.

Step 2: Prepare the Fence

Before you fit the screen panel, you need to prepare the fence. The fence must be thoroughly cleaned and free from any dirt, debris or rust. This will ensure a secure fit for the screen panel. To prepare the fence, start by using a wire brush to remove any dirt, debris or rust from its surface. This will make the surface of the fence smooth and ready for the screws to be fitted. Once you've cleaned the fence, you can move on to the next step, which is fitting the screen panel. Remember, preparing the fence is an important step in the process, so take your time and make sure it's clean and ready before you begin fitting the screen panel.

Step 3: Mark the Fence

Marking the fence is a crucial step in fitting a screen panel. To ensure accurate positioning, use a pencil to make marks where the fence will be located. It's important to double-check that the marks are level and straight to avoid any issues with the final installation. It's also important to make sure the marks are in the right place, as moving the fence once it's been installed can be a difficult task. Take your time during this step to avoid any mistakes and ensure a successful installation. Remember, careful planning and precision at every step will result in a beautiful and functional fence screen.

Step 4: Drill Holes in the Fence

Step 4 of installing a screen panel on a fence involves drilling holes into the fence. This is a crucial step, as the holes will serve as the attachment points for the screen panel. Using a screwdriver or drill, make pilot holes on the fence where you have marked. It's important to make sure that the holes are spaced evenly along the fence to ensure a symmetrical and aesthetically pleasing look. Before you start drilling, make sure that the drill bit is the appropriate size for the screws you will be used to attach the screen panel. This step is relatively simple but should be done with care and attention to detail to ensure a successful installation.

Step 5: Attach the Screen Panel

To do this, you'll need to place the screen panel on the fence and use screws to secure it in place. It's important to ensure that the screws are tight to make sure that the screen panel is firmly attached to the fence. This will help prevent it from coming loose over time, especially in windy conditions. When attaching the screen panel, be sure to align it properly with the fence and use a level to make sure it's straight. Once you have the panel in place, use the screws to secure it to the fence, taking care not to over tighten them, which could cause damage to the panels protective coating. With the screen panel securely attached, you're ready to move on to the final step in the process.

Step 6: Repeat the Process

Repeat the process for the remaining sections of the fence until the entire fence is installed. Ensure each section is properly aligned and securely attached to the posts. Take your time and make sure each step is done correctly to ensure a sturdy and long-lasting fence. Continually check for level and adjust as necessary. Remember to double-check measurements and make any necessary adjustments before moving on to the next section. The key to a successful fence installation is patience, attention to detail and following the process accurately. By repeating the steps consistently, you will end up with a beautiful fence that will provide security and privacy for years to come.

Conclusion

Fitting a garden screen on a fence is a relatively simple DIY project that can be completed in a few hours. With the right tools and materials, you can easily transform your garden into a more private and attractive space. If you are looking for a durable and long-lasting garden screening option, consider aluminium metal garden screening. Not only is it easy to install, but it also requires very little maintenance.

 Browse our range of aluminium metal garden screening today.